Samsung i9300 can flash with odin always error

SirKunon · Aug 21, 2012

As Swanny said, all Kies processes must be disabled. When I flash also disconnected from net and disabling firewall, antyvirus, sandbox and whole unneeded processes which may interrupt Odin. Its a priority.

Try to flash only kernel - Siyah or another with cwm via odin. If it succeed than try wipes.

I suppose you have tried alredy to decrypt nand by phone settings? It is first thing that should be done.

Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2

doimendoza · Aug 21, 2012

SwannyBhoy said:
Probably not relevant but try it anyway. Open task manager and click PROCESSES and search through so all KIES apps are closed (KIESPDLR KIESTRAY) etc and try again.

thanks, but i already uninstalled samsung kies.. but still no luck

---------- Post added at 03:33 PM ---------- Previous post was at 03:10 PM ----------

Try to flash only kernel - Siyah or another with cwm via odin. If it succeed than try wipes.
(can you pls give me a link for the kernel for gt-i9300)

I suppose you have tried alredy to decrypt nand by phone settings? It is first thing that should be done.
( how to do that? if its in phone settings, i cannot do that because when i turn on my phone it will boot normaly but after 5-7 seconds it will freeze then reboot, sometimes when it starts when i enter the pattern lock code it freeze, i cannot go to settings.. it keeps on freezing

can you pls give me a link for the kernel for gt-i9300

im very sorry im a newbie in android and this is my first time to have a smartphone. so i really dont have any idea to fix this without any help from you guys.. i really appreciate all your help.

please extend your patience to help me guys, i dont have that much money to have it m.board replaced
so i want to do anything to fix it, it dont have warranty because it came from my brother working in another country. sorry for my bad english

SirKunon · Aug 21, 2012

If phone is booting your current rom, go to settings and check if encryption option is set. If it is enabled than turn it off.

If this will not help or your phone is not booting up properly than try to flash Siyah kernel as pda in odin, dont change any other option, just select pda (.tar file) and flash:
Siyah-s3-v1.5.tar - 6.90 MB

Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2

doimendoza · Aug 21, 2012

I tried cmw but still no luck , i tried siyah still no luck, same error..

My s3 is not rooted. Im just browsing in play store then it suddenly freeze, so i try to reset it then afer that it keeps on rebooting and freezes.

SirKunon · Aug 21, 2012

Try to run your phone in safe mode and see it behavior with browser etc.

To do that turn off your phone. Now press the power button and imidiately keep pressing menu button (this touch button on the left from home button) until desktop is showed.

It should display 'safe mode' on the bottom-left corner of the screen.

Safe mode has deactivated all third apps installed and run only those from system/app which means stock state.

In app manager you can remove all apps which may cousing a problems.

Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2

riso123 · Aug 21, 2012

Had this the other day funny enough.

Reinstalled use driver with phone removed, plugged phone back in whilst in Download mode and with Odin running and it all worked.

Never installed or used Kies myself. Just download individual driver package and that's all.

Hope this might help you!

Sent from my GT-I9300 using xda app-developers app

123shree · Aug 21, 2012

Probably the NAND storage is faulty... that's why Odin can flash anything. May be... I am just guessing by lookin at the current circumstances.

Sent from my GT-I9300

SirKunon · Aug 21, 2012

Yes, propably faulty nand, but repair is very expensive ca. 250€ He must try every possible way to resurrect the phone.

Some people reported that using old Odin version, 1.85 or even 1.3 can help. Worth a try.

Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2

mps5566 · Aug 21, 2012

JJEgan said:
Yew may fnd 3file n sammobile.com

jje

Hi thanks for the reply the problem is there is so many flash file on sammobile.how can we know witch one contain 3 file?

mps5566 · Aug 21, 2012

SirKunon said:
Try one more thing, set mx.pit as pit check repartition an UNCHECK autoreboot. Flash only pit. If it finish with success dont reboot your phone and do not disconnect it from Odin. Set this time pda, modem and csc (without repartition) and try to flash.

If it fail than its mean propably damaged nand and only service center will help (maiboard replace).

There is an option to flash only param.fs file as pda but i never tried this metod.

Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2

SirKunon said:
https://hotfile.com/dl/158814567/30ec3bc/GT-I9300_XEO_I9300XXALEF_I9300OXFALEA_I9300XXLEF.rar.html

It is XEO (Ost Europe) version but if flashing will be succesfull than you may flash anything you want after that. Only csc or whole newest one file firmware.

Look also at this thread:
http://xdaforums.com/showthread.php?t=1796062

You must be aware that partitionning is not recommended. There is always small chance to screw something but in this case it seams like your last hope.

Personally I never had any problems with .pit (sgs, sgs2,sgs3), but s**t happens.

Wysyłane z mojego GT-I9100 za pomocą Tapatalk 2

SirKunon said:
Yes, propably faulty nand, but repair is very expensive ca. 250€ He must try every possible way to resurrect the phone.

Some people reported that using old Odin version, 1.85 or even 1.3 can help. Worth a try.

Wysyłane z mojego GT-I9300 za pomocą Tapatalk 2

Hi thanks guys for ur help u guys trying to solve my problem but i tried all this dont work i can not even just flash pitt by it self always fails,even just 3 file i try dont work here is the log

<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<ID:0/011> Added!!
<OSM> All threads completed. (succeed 0 / failed 1

do u thing JTAG will solve the problem?

doimendoza · Aug 22, 2012

thanks for all your suggestions.
i tried to boot in safe mode, but even in safe mode the phone still freeze

i try to use odin 1.85 with all the firmware that i downloaded, also the deep clean

but still no luck.

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALEF_611327_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLEF_REV02_REV04_CL1147871.tar.md5 is valid.
<OSM> CSC_OXE_I9300OXEALE4_CL606160_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

doimendoza · Aug 22, 2012

do you think darkside wipe can fix this?

do you guys know how to use darkside in gt-i9300?

because all the instructions about how to use darkside is for galaxy s2

thanks

ChardC · Aug 22, 2012

nand error

Hey all,

I came across a post from another website that I am going to try on my I9300, I will leteveryone know how it comes through, but if anyone else want to try too, refer to the link below.

http://checkrom.com/threads/nand-write-start-stucked-in-odin.920/
http://forums.whirlpool.net.au/archive/1919243

All credit to the authors from these sites.:good:

Regards,
Chard

afca9rico · Aug 22, 2012

I dont get it, why and what peaple make for a mistake with rooting the mobile phone i had 7diferent mobiles and everyone just rooted fine. Maby because the dont read good enough

Sent from my GT-I9300 using xda app-developers app

ChardC · Aug 23, 2012

I don't think it has anything to do with one's inability to read, like you I have several success stories with rooting, it's just that sometimes issues may be experienced as a result of other things persons do with their phones that we are not aware of.

Sent from my GT-I9300 using xda app-developers app

cyberkiller · Aug 25, 2012

doimendoza said:
do you think darkside wipe can fix this?

do you guys know how to use darkside in gt-i9300?

because all the instructions about how to use darkside is for galaxy s2

thanks

I found this problem with my current Galaxy S3 and my old Galaxy S", because boith of them where bought from china.

The solution is fairly easy.

Just do this.

Open the tar file of the official odin update. in my case the file is named: I9300XXDLH7_I9300OXADLH7_I9300XXLH7_HOME.tar.md5. To open this file you have to remove the MD5 extension and leave it as .tar. This has to be done because odin when do the firmware flash it doest a md5 checksum on the file if it has the md5 extension, if not, it just ignore that step.

When you open the file , you have to remove from them, the Modem and both bootloaders files, they are. modem.bin, sbl.bin and boot.bin, if they exist. Some dstributions doesn´t contain any updates on the bootloaders and modems so maybe they are not there.

When you remove them, start the flash using odin and everything should go ok.

After you flash (or before, the order doesnt matter), you can flash modem.bin but not using odin, you can use mobile odin or you can use Clockworkmod recovery or something else besides Odin, because these cell phones has some sort of region codes that lock the flash of foreign firmwares.

I do this steps everytime that a new rom cames out and everything works PERFECT.

I hope it help you.

mps5566 · Aug 26, 2012

cyberkiller said:
I found this problem with my current Galaxy S3 and my old Galaxy S", because boith of them where bought from china.

The solution is fairly easy.

Just do this.

Open the tar file of the official odin update. in my case the file is named: I9300XXDLH7_I9300OXADLH7_I9300XXLH7_HOME.tar.md5. To open this file you have to remove the MD5 extension and leave it as .tar. This has to be done because odin when do the firmware flash it doest a md5 checksum on the file if it has the md5 extension, if not, it just ignore that step.

When you open the file , you have to remove from them, the Modem and both bootloaders files, they are. modem.bin, sbl.bin and boot.bin, if they exist. Some dstributions doesn´t contain any updates on the bootloaders and modems so maybe they are not there.

When you remove them, start the flash using odin and everything should go ok.

After you flash (or before, the order doesnt matter), you can flash modem.bin but not using odin, you can use mobile odin or you can use Clockworkmod recovery or something else besides Odin, because these cell phones has some sort of region codes that lock the flash of foreign firmwares.

I do this steps everytime that a new rom cames out and everything works PERFECT.

I hope it help you.

in my phone i can not flash system file when it starting system file it get fail

GaryLiao · Aug 31, 2012

cyberkiller said:
I found this problem with my current Galaxy S3 and my old Galaxy S", because boith of them where bought from china.

The solution is fairly easy.

Just do this.

Open the tar file of the official odin update. in my case the file is named: I9300XXDLH7_I9300OXADLH7_I9300XXLH7_HOME.tar.md5. To open this file you have to remove the MD5 extension and leave it as .tar. This has to be done because odin when do the firmware flash it doest a md5 checksum on the file if it has the md5 extension, if not, it just ignore that step.

When you open the file , you have to remove from them, the Modem and both bootloaders files, they are. modem.bin, sbl.bin and boot.bin, if they exist. Some dstributions doesn´t contain any updates on the bootloaders and modems so maybe they are not there.

When you remove them, start the flash using odin and everything should go ok.

After you flash (or before, the order doesnt matter), you can flash modem.bin but not using odin, you can use mobile odin or you can use Clockworkmod recovery or something else besides Odin, because these cell phones has some sort of region codes that lock the flash of foreign firmwares.

I do this steps everytime that a new rom cames out and everything works PERFECT.

I hope it help you.

This does seem to make sense, But these region specific codes, are they hardcoded into the device? What if we use a three part firmware with as well as repartition the device? Would this allow us to circumvent this limitation? I currently have an I9300 from China Unicom, and I would like to be able to flash a different bootloader, and I am not sure how to do that. I want to change the bootloader since the phone always boots up with the China Unicom logo.

kirandeep · Nov 19, 2012

I am in same boat so would welcome any other ideas, but its seeming more and more like a nand failure

painterceessie · Nov 22, 2012

kirandeep said:
I am in same boat so would welcome any other ideas, but its seeming more and more like a nand failure

Here another one with the same problem.
I took it to the repair center.
I let you no when I hear something.
Cheers

Samsung i9300 can flash with odin always error

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts