[OTA]672.180.41.XT910.NonEFIGSRetail.en.EU

Vatazhka · Aug 17, 2012

Do not use anymore, there is a full SBF available. Flash using RSD Lite or via moto-fastboot.

This is the official ICS OTA update for the NonEFIGS region.

By means of spoofing firmware version as 651.167.21.XT910.NonEFIGSRetail.en.EU in build.prop user mbartosik managed to download 672.180.41.XT910.NonEFIGSRetail.en.EU OTA update from the QA environment.

If you want to thank user mbartosik, please go to this post and press "Thanks" button.

Download:
URL: Blur_Version.651.167.21.XT910.NonEFIGSRetail.en.EU .zip
MD5: c57e495e901f58b0a070bd57c53eb397

Installation:

If you're on a GB build other than 651.167.21.XT910.NonEFIGSRetail.en.EU, flash this SBF prior to continuing with this OTA update. It is recommended to reset the phone to factory defaults in order to avoid FCs and battery drain.
If you're on a clean (no root, no modifications to the system partition, stock recovery) 651.167.21.XT910.NonEFIGSRetail.en.EU (GB 2.3.6), drop the update onto your external microSDHC card, go to recovery and proceed with update. It is recommended to reset the phone to factory defaults in order to avoid FCs and battery drain.
If you're on an ICS leak:
1. Put the update in your external microSDHC card.
2. Reboot to AP Fastboot.
3. Flash this kernel (also courtesy of user mbartosik): moto-fastboot flash boot boot_new_41.img
4. Flash system_signed from this SBF (unzip it): moto-fastboot flash system system_image
5. Reboot to recovery, wipe cache and proceed with update.
Note: Only use moto-fastboot in order to avoid preflash validation error when flashing the GB 2.3.6 system_signed.

Bugs:
Apps which use extended GPS commands (e.g. GPS Test and GPS Status & Toolbox) won't report visible satellites etc. This can be fixed by flashing newer U_04.12.00R radio image (again, courtesy of user mbartosik) using BootMenu Manager recovery. Beware, this may impact your 2G, 3G, WiFi and Bluetooth performance - in case of problems, you can revert to U_04.10.00R radio which is shipped with this update by flashing this image (as usual, courtesy of user mbartosik).

Original thread (contains screenshots): http://forum.android.com.pl/f472/wy...d-date-mon-jul-16-11-15-45-cst-2012-a-203392/

aaatoel · Aug 17, 2012

Can someone tell us the languages that are included? Much appreciated!

romdroid. · Aug 17, 2012

So is this supposed to be the "official ICS"? thx Vatazhka

how do we install it if we are on eclipse or some other custom rom?

underface · Aug 17, 2012

romdroid. said:
So is this supposed to be the "official ICS"? thx Vatazhka

how do we install it if we are on eclipse or some other custom rom?

you must install service soft by rsd (ICS) and go to second point of OP

for autor

If we are to charge any leaks ICS fastboot package for 651.167.21.XT910.NonEFIGSRetail.en.EU, we also need EternityProject's FastBoot flashME

Vatazhka · Aug 17, 2012

romdroid. said:
So is this supposed to be the "official ICS"? thx Vatazhka

how do we install it if we are on eclipse or some other custom rom?

I only set up the thread - all kudos to mbartosik for pulling the OTA and sharing the patched kernel.

I'm not sure which partitions are being modified by custom firmwares, so flashing the ICS SBF prior to proceeding with the new kernel and GB system might be a safe bet. In theory, you should then flash the attached kernel and 2.3.6 system image, then apply OTA from the stock recovery. However, I stumbled upon preflash validation error when trying to flash system from NonEFIGS 2.3.6 over the leaked 676.226.3.

With regard to FlashME.bat - I don't use Windows. The FlashNIX.sh seems to be a clone of tools shipped within the ICS SBF. I will publish step-by-step tutorial once I get over the preflash validation error.

Sent from my XT910

HSD-Pilot · Aug 17, 2012

The steps are really simple to do.
You just need an working ADB on your PC

Fastboot flash boot boot_new.img
Fastboot flash system system_signed

Boot in Recovery, wipe data & cache and apply the update.

All you guys need is the system signed of the based GB Fastboot and the linked boot.img :thumbup:

Sent from my CustomiZed XT910

Rutz272 · Aug 17, 2012

Is it possible to update to this version from 651.73.30.XT910.NonEFIGSRetail.en.EU (2.3.5)? This is the latest officialy available (non-branded) version in my country (Czech Republic). Thx for the answer.

achillesgk · Aug 17, 2012

aaatoel said:
Can someone tell us the languages that are included? Much appreciated!

Dansk
Deutsch
English (U.K. & U.S)
Espanol (Espana & Espados Unidos)
Greek
Francais (Canada & France)
Italiano
Nederlands
Norsk bokmal
Polski
Portugues (Brasil & Portugal)
Suomi
Svenska
Turkce

Vatazhka · Aug 17, 2012

HSD-Pilot said:
The steps are really simple to do.
You just need an working ADB on your PC

Fastboot flash boot boot_new.img
Fastboot flash system system_signed

Boot in Recovery, wipe data & cache and apply the update.

All you guys need is the system signed of the based GB Fastboot and the linked boot.img :thumbup:

Well, ADB in this context is only useful to enter AP fastboot mode... I followed this procedure using fastboot binary from the ICS SBF, but an attempt to fastboot flash system system_signed gave me preflash validation error (And yes, I was using the correct SBF.) - any suggestions?

Edit: It seems that the fastboot binary bundled within ICS SBF file is defective. I used moto-fastboot binary from this post and successfully flashed system image!

Besides that, how to update the recovery? Is partition dump the only way?

HSD-Pilot · Aug 17, 2012

It should be the same procedure, like we used on EU Leaks. Only the Files have to be changed.

http://xdaforums.com/showthread.php?p=28006523

Sent from my CustomiZed XT910

tgm28 · Aug 17, 2012

Can someone tell me what are the differences between 676.226.3.XT910.Retail.en.EU and 672.180.41.XT910.NonEFIGSRetail.en.EU (except numbers, date build, localization and preinstalled apps)? Your feelings in use, speed, smooth or that is something working or not.

febanovsky · Aug 17, 2012

I am on retail.en.eu ICS 4.0.4... Is there way to install non EU on my RAZR via fastboot? Or any other? Default ROM in my RAZR was nonEU 2.3.6, so I want to switch to nonEU again. With official ICS nonEU my warranty will back

romdroid. · Aug 17, 2012

do u think there will be a fastboot file availabe so we can flash it?

achillesgk · Aug 17, 2012

febanovsky said:
I am on retail.en.eu ICS 4.0.4... Is there way to install non EU on my RAZR via fastboot? Or any other? Default ROM in my RAZR was nonEU 2.3.6, so I want to switch to nonEU again. With official ICS nonEU my warranty will back

Υes you can, its easy (already done it) :

See the video and follow the instructions steb by step

http://www.youtube.com/watch?v=aCyJcMTwMt8&feature=plcp

But you need to change some files (3&4).

So, the correct files that you will need are:

1) http://xdaforums.com/attachment.php?attachmentid=1080638&d=1337846142 (extract to desktop)
2) SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_RTCEE_CFC_HWp2b_SIGNED.xml.zip (Europeans NonEFGIS) from here: http://sbf.droid-developers.org/umts_spyder/list.php (you will need system_signed archive, copy to desktop )
3) https://hotfile.com/dl/167461766/1e24d34/Blur_Version.651.167.21.XT910.NonEFIGSRetail.en.EU.zip.html (copy to external sd)
4) http://www.mediafire.com/?gqq7qm6j0nq6mmf (rename it: boot_new.img & cope to desktop)

You will need those commands cmd (you can copy and paste)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed

(thanks to frastgr)

pedrotorresfilho · Aug 17, 2012

Vatazhka said:
Well, ADB in this context is only useful to enter AP fastboot mode... I followed this procedure using fastboot binary from the ICS SBF, but an attempt to fastboot flash system system_signed gave me preflash validation error (And yes, I was using the correct SBF.) - any suggestions?

Besides that, how to update the recovery? Is partition dump the only way?

fastboot will not work to system_signed

use instead

Code:

moto-fastboot flash system system_signed

Cheers

Edit:
What do we have here?

Moto-fastboot
lol

febanovsky · Aug 17, 2012

achillesgk said:
Υes you can, its easy (already done it) :

See the video and follow the instructions steb by step

http://www.youtube.com/watch?v=aCyJcMTwMt8&feature=plcp

But you need to change some files (3&4).

So, the correct files that you will need are:

1) http://forum.xda-developer...8&d=1337846142 (extract to desktop)
2) SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_RTCEE_CFC_HWp2b_SIGNED.xml.zip από εδώ: http://sbf.droid-developer...pyder/list.php (you will need system_signed archive, copy to desktop )
3)https://hotfile.com/dl/167...en.EU.zip.html (copy to external sd)
4) http://www.mediafire.com/?gqq7qm6j0nq6mmf (rename it: boot_new.img & cope to desktop)

You will need those commands cmd (you can copy and paste)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed

(thanks to frastgr)

I need file from step 3, please

romdroid. · Aug 17, 2012

achillesgk said:
Υes you can, its easy (already done it) :

See the video and follow the instructions steb by step

http://www.youtube.com/watch?v=aCyJcMTwMt8&feature=plcp

But you need to change some files (3&4).

So, the correct files that you will need are:

1) http://forum.xda-developer...8&d=1337846142 (extract to desktop)
2) SPDREM_U_01.6.5.1-167_SPU-15-M2-1-CEE_1C.91P_0A.6C_RTCEE_CFC_HWp2b_SIGNED.xml.zip από εδώ: http://sbf.droid-developer...pyder/list.php (you will need system_signed archive, copy to desktop )
3)https://hotfile.com/dl/167...en.EU.zip.html (copy to external sd)
4) http://www.mediafire.com/?gqq7qm6j0nq6mmf (rename it: boot_new.img & cope to desktop)

You will need those commands cmd (you can copy and paste)
cd desktop
eprj-mfastboot flash boot boot_new.img
eprj-mfastboot flash system system_signed

(thanks to frastgr)

links from step 1-4 is broken

febanovsky · Aug 17, 2012

romdroid. said:
links from step 1-4 is broken

found it

link from step 3 in 1 post

my mistake - https://hotfile.com/dl/167461766/1e24d34/Blur_Version.651.167.21.XT910.NonEFIGSRetail.en.EU.zip.html
link from 1 step: http://xdaforums.com/attachment.php?attachmentid=1080638&d=1337846142

romdroid. · Aug 17, 2012

Thanks, do we still need to download -> " SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Servic e1FF_fastboot.xml.zip" and unpack it as this tutorial? http://xdaforums.com/showthread.php?p=28006523

Because it's stated 2.3.6 I think we will brick, or?

I wonder if it will work because I am on custom rom..?

febanovsky · Aug 17, 2012

romdroid. said:
Thanks, do we still need to download -> " SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Servic e1FF_fastboot.xml.zip" and unpack it as this tutorial? http://xdaforums.com/showthread.php?p=28006523

Because it's stated 2.3.6 I think we will brick, or?

I wonder if it will work because I am on custom rom..?

My battery is charging (60%), I will try soon.

[OTA]672.180.41.XT910.NonEFIGSRetail.en.EU

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts