[KERNEL] Clemsyn Ver 11 1.5ghz and BEYOND with PimpmyGtab vltage cntrl

HAPPY NEW YEAR TO ALL!!!

THIS Build has CIFFS, PPTP, VPN, MPPE, PPOE, Proxy Support, EXT4 Support, NTFS Support, Joystick/GamePad support. 3g Modem is also enabled in this kernel

The kernel will now work with Zpad ROM, TNT ROM and VEGAN ROM. WIFI fix is now included with the kernel

Thanks rothnic for guiding me with CIFFS
Thanks to pershoot and other devs..

Sleep fix and HDMI has integrated CIFFS, PPTP, VPN, MPPE, PPOE, Proxy, EXT4, NTFS, Joystick/Gamepad etc....SD-ext is fixed


------------------------------------------------------------------
UPDATE:

New kernel up with ThumbEE support, update to 10.9.9 and few minor tweaks in kernel. Please test, only for FROYO at the moment Also, please clear Dalvik-cache after installing kernel.

Kernel now dated to determine the latest (3/20/11). Latest kernel has all with more permanent sleepfix, thumbee, watchdog...etc..

Froyo version 5 kernel and Gingerbread beta 2 (Vegan gingerbread) up.

Version 6 up

Version 7 is up. I RECOMMEND YOU STAY IN VERSION 6 if it is stable. I have no Gtab to test version 7 but it works with my testers. In my opinion, version 7 has better sleep support than 6 but according to a few testers, it's a bit slower.

Version 8 is up. Bluetooth bug is fixed. Workaround for sleep built in the kernel.

Version 9 is up with better Bluetooth support and better sleep fix

Update on Version 9:

Tested with an Ubuntu laptop bluetooth and was able to receive and send a 30mb file with a transfer rate of 60-80 kb/sec

-----------------------------------------------------
-----------------------------------------------------
UPDATE: VERSION 10 is up..There are three types with different voltages settings.
Clemsyn1.5Froyoextra - 750 mv - 1250 mv
Clemsyn1.5FoyoMed - 750mv - 1200 mv
Clemsyn1.5FroyUV - 700mv - 1175 mv

I myself prefer Clemsyn1.5FryoUV for battery life but it might not work for you tegra. Just try Med and if it still don't work, try extra.

Please don't forget to wipe the Dalvik-cache then wipe the cache partition after installing kernel. Thanks!
Gingerbread version is up!

Uploaded second version of Froyo 1.5ghz with better voltage support (I think )

UPDATE: 4/22/11

Updated Overclocking code using CPajuste's.

UPDATE: 4/25

Got PimpMyCPU working by working on his APK BTW, this is pretty good
\
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------

UPDATE:

******** PIMPMYGTAB AND KERNEL ON SECOND POST **********************

PIMPMYGTAB VOLTAGE CONTROL and Clemsyn Kernel Version 11

This is my latest kernel with Updated Frequency table for 1.5 ghz to support PimpMyGtab.apk
Additions are Advance Net Config
Incorporated pershoot's latest wifi drivers...Thanks Pershoot

The voltages in each frequency are the max that I will release for 1.5 ghz. Please use PimpMyGtab to undervolt it as much as your Gtab could

1500000 - 1300mv
1200000 - 1200mv
1000000 - 1100mv
912000 - 1000mv
608000 - 900mv
4560000 - 825mv
2160000 - 750mv

Remember if UV used to work for you Underclock to 1175-1200 at 1500000
If Medium Used to workk for you Underclock to 1200-1250 at 1500000
If Max Used to work for you Underclock to 1250-1300 at 1500000

Note: If you make changes to the voltage, make sure you don't go over 100mv limit by Nvidia

Eg. 1200mv - 1300mv (100mv)

You can go less but not over (actually you can go over but lets just keep it within limits )

Here is the link for instruction on how to use PimpMyGtab

http://xdaforums.com/showthread.php?t=1018411

** If you get a scaling_governor error when starting PimpmyGtab...You just have to set the scaling governor by typing echo powersave > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor or by installing CPU Master and choosing Powersave in Governor

BTW, if you like my work, please dont hesitate to buy me a BEER

Also if you like PimpMyGtab...Make sure you purchase PimpMyCPU (This is the source) by CPasjuste. BIG THANKS TO Cpasjuste.

-----------------------------------------------------------
-----------------------------------------------------------
UPDATE 4/27/11

System/AVP no Oc'd to 266400
GPU now overclocked to 425000

1.5ver11avpsystemOCFROYO(Gingeer).zip

When installing a new kernel, make sure you uninstall PimpMyCPU the reinstall to allow it to read the current kernel settings

If you like my work, pls buy me a beer or maybe a whiskey

5/1/11

Due to PM requests...I'm releasing 1.6 and 1.7 kernel..Please be advised that voltage settings and speeds are above nvidia recommended settings.

IF you are using 1.6ghz and 1.7ghz with my combo or Calkulin's ROM...you need to edit /system/etc/init.d/01cpufreq_screenstate_scaling to use 1700000 or 1600000 speed. All these kernels are compatible with PimpMyGtab. Make sure you uninstall PimpMyGtab and install the kernel, then reinstall PimpMyGtab and tweak it accordingly, also make sure you save the current settings as boot.

lamlam01 said:

Thanks, could you help provide a change log?

Click to expand...

Click to collapse

here is the change log up to 10.9.2

http://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=shortlog;h=refs/tags/tegra-10.9.2

IPv6 is not included coz it breaks our wifi (needs a ROM with new modules to make it compatible with the kernel)

tegra bluetooth sleep not added (coz I dont use it)
HDMI not added (dont use it to)

Viewsonic's kernel was only up 10.8.2 so I put the changes to bump us up to 10.9.2. Working on 10.9.3. Once I get 10.9.3 running, I will release it for Vegan and TNT.

Working on 10.9.3 right now. Halfway through porting the fixes and working around the bugs, I have to say it is much snappier now. Will release 10.9.3 soon.

bittrix said:

I've always treated kernel like a black box... My hat's off to you dark wizards who play there.

I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?

also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.

Best, Bittrix.

Click to expand...

Click to collapse

CIFS/SMB support is not yet enabled. Would like to try to finish this 10.9.3 or maybe up to 10.9.7. Regarding the external USB port, I will have to look into that.

Building 10.9.3 at the moment and will call it quits after this. Kids will start waking up soon

samepic said:

Thanks for the hardwork! Will these kernels apply to the latest TNTLite (3.1.4) and Vegan (Beta5) releases?

Click to expand...

Click to collapse

Only Vegan at the moment. When I get 10.9.3 going, I'll make one for TNT (that is if the kids are still napping)

Update:

Just encountered another bug..Will have to figure out what's causing this before I can continue If I can get over this bug, I think we can jump to 10.9.7.

Update:
OK got it! Will post 10.9.3 and make one for TNT

UPDATE 10.9.3 is up...

bittrix said:

I've always treated kernel like a black box... My hat's off to you dark wizards who play there.

I'm running Vegan ß5.1, and just tried your 9.1 and 9.2 kernels. They both feel good so far, but I'm unable to connect with my file server running CIFS. Have you included CIFS/SMB support?

also, is there a magic way to turn on the external USB port for more things? I have a holux GPS mouse and would love to use it but can't find even rudimentary serial comms for our big beautiful USB. That's the last hardware hurdle I have (except the screen) to making the gtablet truly useful in my car.

Best, Bittrix.

Click to expand...

Click to collapse

I have compiled a kernel that enabled serial USB for you with 10.9.3. PM me on what build you are currently using.

bittrix said:

Unbelievably cool! Thank you. I appreciate it. PM sent.

Click to expand...

Click to collapse

Try this and let me know how it goes

I assume its a CP210x family so I build a module for it.

rothnic said:

Glad you are taking this on. I do think that CIFS support most people would want by default.

I'm trying your 10.9.3 versions both on my zpad build and it doesn't get past the boot.img bootscreen. I'm going to look more into it, the stock TnT boot.img booted fine with my system.img so not sure what it would be.

Click to expand...

Click to collapse

Building CIFS support won't be an issue. I honestly don't use it so I am not familiar with it. I see options to enable CIFS and a few more options related to CIFS. If you can PM me on what options to enable to get it going I would greatly appreciate it.

bittrix said:

It's a GR213u... trying to connect now... (typing this using your holux 9.3 build)

Click to expand...

Click to collapse

Let me know how it goes