ClockworkMod Recovery 6.0.4.7 for Samsung Galaxy S5 SM-G900H 3G (Exynos)
Warning: This operation involves risk. I or XDA can not be held responsible for any problems encountered.
Credits & Thanks go to Chenglu & Theandroidsoul
Warning: This operation involves risk. I or XDA can not be held responsible for any problems encountered.
Credits & Thanks go to Chenglu & Theandroidsoul
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Install this Recovery will get your Knox counter 0x1
Requirements
- Have installed the drivers / drivers for your phone - >> HERE
- Have downloaded and unzipped the file - >> Odin307.zip
- Download file - >> g900h-cwm-recovery-6.0.4.7.tar - COPY Miror
- Make sure you have a charged battery (75% minimum)
Installation procedure:
- Turn off your phone.
- Simultaneously press the buttons: Volume Down + Home + Power. Then press again the power button to start the Download mode.
- On your computer, launch Odin in administrator mode.
- Connect your phone to your computer via the USB cable. In ODIN, box ID: COM turns blue proof that your phone is correctly detected.
- Click on PDA and select the "g900h-cwm-recovery-6.0.4.7.tar" file you downloaded on your computer.
- Check the boxes that only Auto Reboot and F. Reset Time are checked.
- Start the installation of ClockworkMod Recovery by clicking the Start button and wait a few moments.
- At the end of the installation, you can disconnect your phone from your computer.
Procedures to enter the recovery of S5:
- With physical keys :
- Phone turned off, press the following buttons simultaneously until you see the Samsung logo: Vol Up + Home + Power
- Installing the Quick Boot Reboot application :
- On the Google Play Store - >> Link to the application (ROOT Required)
- Open the application, grant root privileges, then click "recovery"!
- On the Google Play Store - >> Link to the application (ROOT Required)
- Performing a ADB command :
- Install first the drivers, then download / uncompress the file ADB files.zip
- Make sure you have USB debugging enabled
- Connect your phone via USB, and confirm the message pop-up window that appears
- Then from the folder where you previously extracted the contents of ADB.files.zip file, double click "Boot into Recovery Mode.bat"
- This file performs the following ADB command:
Code:
adb reboot recovery
Your feedback is welcome
Last edited: