[CM10][PA][22.01.2013] CM10+PA for Huawei Mediapad

CyanogenMod 10 and Paranoid Android roms for Huawei Mediapad.

Working:
- Radio;
- Data connection;
- Touchscreen;
- Full hardware acceleration;
- Sound;
- Microphone;
- Sensors;
- Wi-fi;
- GPS;
- Bluetooth;
- Usb-host;
- Usb connection to PC (mtp/ptp);
- Camera;
- HDMI (on latest PA).

Problems:
- Some problems with apps that uses camera;
- Glitches/flickerings/shifting of image via HDMI.

Download:
- Automated installer of TWRP/CWM/STOCK Recoveries;
- Latest versions here: cm10 - http://xdaforums.com/showpost.php?p=35041860&postcount=492 and Paranoid Android - http://xdaforums.com/showpost.php?p=37033132&postcount=574, latest cm10 with ion/hw vsync and w/o camera: http://xdaforums.com/showpost.php?p=34167317&postcount=400.
- Google apps (always fresh version).

Instructions: !!!Be aware that im not responsible for any damage that can cause this rom!!!
1. Be sure that you have installed 4.0.3 stock official rom from huawei.
2. Now you need to install TWRP/CWM recovery.
To do it download zip with Automated installer of TWRP/CWM/STOCK Recoveries to PC, unpack it in the place you like on PC, run install_recovery.cmd and follow onscreen instructions.
2. Then download CyanogenMod 10 for Huawei Mediapad, Google apps and place them on your internal or external sd.
3. Boot in TWRP/CWM Recovery, then choose Backup and confirm operation (you will get full backup of stock rom).
4. If you want flash rom on top of previous cm10/pa rom - skip this part and go to 5.
Otherwise If you goes from stock or AOKP rom then Press back to go to main menu and choose Wipe there and choose Factory reset there and confirm operation .
5. Press back again and choose Install, then find downloaded zip rom, choose it and and confirm operation .
6. Press back again and choose Install, then find downloaded zip with Gapps, choose it and confirm operation .
7. Then reboot in system and enjoy CyanogenMod 10/Paranoid Android rom on your Mediapad

PLS notice: twrp/cwm recoveries are intended to use with custom roms like cm10/pa/aokp. In stock huawei rom internal memory is mounted to data/data. But custom recoveries have an option to bypass only internal memory that mounted to data/media. So for stock rom these recoveries will do backup of internal memory during backup and will do wipe during factory reset. But they wont do it for custom roms like cm10/pa etc.

Sources:
- https://github.com/aftersilence.

kakabobo said:

just to check does it support 1280x800 mode ?

Click to expand...

Click to collapse

1280х800 - its a resolution of display, you cant change it with any rom, its hardware property.
But if you are talking about "tablet mode" - you can change it on any firmware of any device by editing ro.sf.lcd_density, its just adjust the size of icons/ui, but resolution is always the same - 1280x800
I think that JB is not an exception and you can set dencity to 160 to see "tablet mode", but from stock for 7" devices cm10 have a look like on Google Nexus 7 and i like it.

First version is uploaded, see OP (dont blame me for bugs pls )

monkeydrufy said:

does the HW Composer work?

thanks

Click to expand...

Click to collapse

I think so.

Corn Flake said:

Thanks, but can you change to tablet ui? This looks like big phone.

Click to expand...

Click to collapse

Oh... again this.. Can you do you it for yourself by changing dencity to 160 in build.prop or its too hard and everyone must to buy glasses to see what happend on tablet with "tablet mode"?
Its not my UI, its made by Google in Android 4.1. And thats default UI for 7" tablets on CM10 too. Pls, stop asking such questions,

Its present on stock huawei roms too, but on jelly bean overall speed is higher, so its not so bad. I don't know what causes it, but there are still a lot of work need to be done at libs and kernel sides.
But even now jb is awesome IMHO

Sent from my Liquid using xda app-developers app

enacu said:

@after_silence, I agree

JB is much better overall

will try to find something about the lag. Could you tell me what drivers do you use for Adreno 220? (any link?) As I know, there is Adreno 220 included. Am I right?

Click to expand...

Click to collapse

Mmm.. for now every device with cm10 using Adreno 2xx User-mode Android 4.1 Jelly Bean Graphics Driver (ARMv7) (early sample) from here .
As i can see from other kernels with msm8660 there are needed to be update kgsl drivers, some things about display, mdp and a lot of other stuff.